EZ Chock Motorcycle Wheel Chock

The EZ Chock is the motorcycle wheel chock that clips into the track you already have. One chock, built for E-Track, L-Track or X-Track, on the wall or on the floor. Clip it in, roll the bike forward, strap it down, and you're loaded. When the trip is over, unclip it in seconds and your trailer, van or truck bed is wide open again. It holds motorcycles, dirt bikes, e-bikes and fat-tire bikes, and it's made in the USA in Iowa.

Load more bikes, at the angle you need

Horses are loaded at an angle, so why not your iron horse? The EZ Chock's modular angle bracket gives you 7 ways to set the chock, so it fits the space instead of the other way around.

• 45° left or right of the wall: the standard angle for trailers.
• Straight at 90°: leave the angle bracket out to load on center.
• Parallel to the same wall, bike on the left or right side.
• Bulkhead (perpendicular) wall, left or right: the "twist" setups for tight corners, vans and truck beds.

Loading at an angle offsets the handlebars, so bikes sit closer together. That leaves more room for gear and the cooler, and in some setups you can walk around the back of the bikes.

Clips in and out in seconds

A bolted-down chock in the middle of the floor gets kicked, tripped over and in the way of everything else you haul. The EZ Chock's spring lock works with one finger: pull the lever back, set the clip in the track, and let it snap into place. Pull it again and the chock comes out. Your trailer is a multi-use trailer again.

Built heavy, made in the USA

Every EZ Chock is built in Iowa from heavy-duty 10-gauge steel and finished in a premium textured powder coat. The curved cradle holds tires from 2.5" to 6" wide snug, so you can strap the bike forward into the chock with confidence. Choose black or one of four colors (blue, green, orange or red) to match your bike or rig. Running a team or club? Custom colors are available with a 20-chock minimum: call 833-MOTO-333.

Wall mount: keep the floor clear

Wall-mounted EZ Chocks are the favorite in enclosed trailers and vans because the floor stays completely open. Mount the track at axle height: 14.5" on center fits the most common bike sizes. Strap to the wall or to floor track, whichever your trailer's walls are built to handle. In vans, the wall chock with an EZ Chock Extension offsets a center bike's handlebars so a third bike fits, and it replaces the bulky bar systems many vans use.

Floor mount: put the chock where you want it

Floor-mounted EZ Chocks let you run a line of track exactly where you want your bikes: along a wall in a toy hauler, down the middle of a utility trailer, or right by the back doors of a van. They're a favorite with street, adventure and dual-sport riders.

• Mount the track 2.5" to 6" from the wall to leave room for the chock and the bike.
• Works with surface-mounted or recessed track. Floor kits come with the hardware for either.
• Heavy adventure bikes are no problem: fasten the track into the structural framing (bracing), and strap the bike at each corner. On longer runs of track, a few extra bolts help too.

Which track is right for you?

E-Track is the most common track in enclosed trailers and the most affordable. L-Track (airline track) costs a little more, but it's sleeker, catches less dirt and gives the clip a naturally tighter fit, which is why we suggest it for moto vans and truck beds. X-Track is a heavy-duty cargo control rail with an X-shaped slot pattern that locks fittings in both horizontally and vertically. Whichever you run, there's an EZ Chock made for it.

Small bikes and tight spots

• 110cc bikes fit the EZ Chock as is.
• 50cc bikes: add the Lil' Bike Drop Plate, which lowers the chock to a small bike's axle height so the little ones ride along with the big ones.
• Wheel well in the way? The EZ Chock Extension moves the chock past it (3" or 6.5"), so you can run chocks down one wall.

What's in the kit

• Premium textured, powder-coated EZ Chock
• Clip assembly for your track (E-Track, L-Track or X-Track)
• Angle bracket with 7 positions (floor kits add the rubber foot and spacers for surface or recessed track)
• Hex bolt hardware that won't strip
• 2 tie-down rings for your track (over a $10 value)

Track and straps are not included. Track is cheaper to buy locally than to ship, so pick it up at your local hardware or trailer supply store. Need straps? Our NiceStraps soft-tie cam-buckle straps are the perfect match.